1. Introduction to the SLA process
Lithography molding technology is also known as stereo lithography appearance (SLA). It mainly uses liquid photosensitive resin raw materials, designs a three-dimensional digital model through 3D design software (CAD), uses discrete programs to slice the model, designs the scanning path, irradiates the surface of the liquid photosensitive resin according to the designed scanning path, and superimposes the three-dimensional workpiece prototype by layered scanning and solidification.
Light-curing molding technology works on the principle of photopolymerization of liquid photopolymerized resins. This liquid material can quickly undergo photopolymerization reaction under the irradiation of ultraviolet light of a certain wavelength and intensity (such as =325nm), and the molecular weight increases sharply, and the material is transformed from liquid to solid. The liquid tank is filled with liquid light-curing resin, and the laser beam is scanned on the surface of the liquid resin under the action of a polarizer, and the liquid solidifies where the light spot hits. At the beginning of molding, the working platform is at a certain depth under the liquid surface, and the focused spot is scanned and solidified point by point on the liquid surface according to the instructions of the computer. When one layer of scanning is completed, the unirradiated place is still liquid resin, and then the lifting table drives the platform down one layer of height, the scraper is coated with another layer of resin on the formed layer and scraped flat, and then the next layer is scanned, and the newly cured layer is firmly glued to the previous layer, and so on until the entire part is manufactured to obtain a three-dimensional solid model.
The specific working steps are as follows:
1) Fill the print cell with liquid photosensitive resin material.
2) Stop when the print plate is raised until it is one layer thick from the liquid surface.
3) The horizontal scraper moves in a fixed direction to scrape the liquid surface into a horizontal plane.
4) The laser generates a laser beam, which is focused through the lens and then irradiated on the polarizer, at which time the polarizer automatically produces an offset according to the slice section path, so that the beam will continue to be selectively scanned on the liquid surface according to the model data, and the liquid resin irradiated is gradually solidified due to the photosensitive characteristics of the resin.
5) After the curing is completed, the printing plate automatically reduces a fixed height (one layer thickness), the horizontal scraper scrapes the liquid surface flat again, and the laser irradiates the curing again, and so on until the entire model is printed.
The advantage of light curing molding technology is high precision, can express accurate surface and smooth effect, the accuracy can reach 0.05~0.15mm thickness of each layer. The disadvantage is that the materials that can be used are limited and multi-color molding is not possible.
2. Recent advances in SLA technology
The current progress of SLA technology is mainly reflected in the following aspects:
The forming machine, electricity and control system are constantly improved, so that the stability, processing quality and efficiency are continuously improved
The three-dimensional light curing process is like building a castle in the air, and local processing defects will cause the failure of the entire processing process, which has natural fragility, so the stability of the equipment is crucial. To improve the stability of the equipment, we must start from the optical, mechanical, electrical, and software parts. The new light curing molding equipment adopts advanced vacuum adsorption coating system, which greatly improves the reliability of the coating of the large plane, and completely eliminates the bubbles, and the whole coating time is greatly shortened; the electrical system of the molding machine adopts PLC control, stability and reliability are guaranteed; the control software can automatically adjust the process parameters according to the change of laser power, so the performance of the whole machine is greatly improved.
3. The development trend of SLA technology
Because rapid prototyping is in line with the trend of digitalization of the processing process, in the long run, it will inevitably transform from prototype processing to product processing, and may become a major 3D printing processing method in the future. In the next few years, 3D printing equipment technology will appear a relatively stable stage, the development is mainly reflected in the improvement of production efficiency and the improvement of materials. As people continue to understand RP, various RP processes will play their role in the field that suits them best. As a "strange flower" in the RP hundred gardens, light-curing molding will continue to lead in the field of high-end rapid prototyping of non-metallic materials with its excellent precision.





